bhyve を運用してるサーバーをリプレイスしました。
HDD の最安値構成にNVME とメモリーは増設しています。セキュアブートを無効にしてインストール。引っかかるところなく、稼働してます。
届くまで
注文から九日で到着。日通とクロネコヤマトのコラボ？で到着。
- 注文済 2020/04/22
- 出荷済 2020/04/24
- 配達済 2020/05/01
dmesg
% cat /var/run/dmesg.boot
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p3 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: AMD Ryzen 5 PRO 3400GE w/ Radeon Vega Graphics (3293.89-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x810f81 Family=0x17 Model=0x18 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 31216205824 (29770 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-M2F >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 4 7 6 5 1 2 3
Timecounter "TSC-low" frequency 1646942649 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-M2F> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.6 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xfc00-0xfcff mem 0xfce18000-0xfce18fff,0xfce10000-0xfce13fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x50000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 6c:4b:90:eb:f1:d7
re0: netmap queues/slots: TX 1/256, RX 1/256
pci2: <simple comms, UART> at device 0.1 (no driver attached)
pci2: <simple comms, UART> at device 0.2 (no driver attached)
pci2: <serial bus> at device 0.3 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfce14000-0xfce14fff,0xfce00000-0xfce03fff at device 0.4 on pci2
ehci0: pre-2.0 USB revision (ignored)
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcc00000-0xfcc7ffff at device 0.0 on pci3
hdac0: <ATI (0x15de) HDA Controller> mem 0xfccc8000-0xfcccbfff at device 0.1 on pci3
pci3: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci3
xhci0: 64 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff at device 0.4 on pci3
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
pci3: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD (0x15e3) HDA Controller> mem 0xfccc0000-0xfccc7fff at device 0.6 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci4: <ACPI PCI bus> on pcib4
ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfcd00000-0xfcd007ff at device 0.0 on pci4
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <(0x10ec) EHCI root HUB> at usbus0
ugen2.1: <0x1022 XHCI root HUB> at usbus2
ugen1.1: <0x1022 XHCI root HUB> at usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2: <(0x10ec) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
nvd0: <ADATA SX8200PNP> NVMe namespace
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000LM049-2GH172 LXM4> ACS-3 ATA SATA 3.x device
ada0: Serial Number WN91YYZF
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
nvd0: 976762MB (2000409264 512 byte sectors)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
hdacc1: <Realtek (0x0222) HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek (0x0222) Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek (0x0222) (Front Analog)> at nid 33 and 24 on hdaa1
pcm4: <Realtek (0x0222) (Front Analog Mic)> at nid 25 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub1: 8 ports with 8 removable, self powered
ugen1.2: <vendor 0x05e3 USB2.0 Hub> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.52, addr 1> on usbus1
uhub3: MTT enabled
Root mount waiting for: usbus1
uhub3: 4 ports with 4 removable, self powered
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0